Louvered Villa Privacy Fence Dubai

Description

Louvered Villa Privacy Fence Dubai is pictured above a villa garden boundary wall. It features a light upper section with visible horizontal louvers and more enclosed panels below. The slatted upper detail breaks up the facade while the lower section provides a calmer screen.

Designing Louvered Villa Privacy Fence for your outdoor space

At a wall top, the existing masonry and any capping need to be checked before deciding on post spacing and fixings. Panel colour, height and joint positions can be adjusted to suit the existing wall, adjacent planting and villa architecture. Each section is sized from actual measurements so corners and changes in level are handled coherently.

Material and construction options

The upper band in the photograph has horizontal louvers above a more enclosed lower section. Slat spacing and the lower panel material can be chosen to balance privacy with the look of the villa. Tent Shed can discuss GI or MS steel pipe for the supporting structure. Options for upright columns include 2, 3 and 4 inch pipe; 1, 2 and 3 inch rails or purlins may be selected to suit the span. A reference GI pipe build uses 4 inch columns at 3 mm and 2 inch purlins at 2 mm; wall-top fixings must be sized for the real substrate.

• Upper infill: horizontal louver appearance as pictured.
• Lower infill: closed privacy panel, final material and colour by quotation.
• Support frame: GI or MS steel options with site-specific section thickness.
• Mounting: wall-top plates or fixings subject to wall assessment.
• Overall height and span: made to measure for the boundary.

Made to measure and quoted for your site

For Louvered Villa Privacy Fence, confirm the existing wall height, preferred slat spacing and sightlines before fabrication. Tent Shed can then prepare a panel layout and steel finish to fit the property; request details through the contact page. See Tent Shed contact details to share measurements and discuss a tailored fence quotation.