Fabric Pool Safety Fence

Fabric Pool Safety Fence is a made-to-measure fabric-look pool enclosure around an open villa swimming pool. The picture shows a low, light-coloured fabric-look enclosure with fine upright divisions. Tent Shed can specify the infill, steel support and dimensions to suit the site.

SKU: TS-FEN-2609-017 Category:

Description

Fabric Pool Safety Fence is pictured around an open villa swimming pool. It features a low, light-coloured fabric-look enclosure with fine upright divisions. A light screen separates the pool edge visually while retaining views of the house and garden.

Designing Fabric Pool Safety Fence for your outdoor space

For a freestanding run, the route of the fence, changes in level and foundation or slab fixing points should be measured on site. The post spacing, access points and finish should follow the pool plan, while barrier dimensions and hardware are confirmed against applicable requirements. Each section is sized from actual measurements so corners and changes in level are handled coherently.

Material and construction options

The pictured barrier has a fine, light-coloured screen between slim posts. A fabric specification can be quoted with HDPE net material after confirming the desired visibility, panel height and attachment method. Available frame choices include GI or MS steel. Support posts may be specified in 2, 3 or 4 inch pipe, with suitable 1, 2 or 3 inch rails as the layout requires. A reference specification uses 4 inch GI columns at 3 mm and 2 inch GI purlins at 2 mm; final sizes are confirmed for the pictured pool setting.

  • Screen: HDPE net fabric option, with colour and openness agreed at quotation.
  • Frame: GI or MS pipe chosen for the barrier height and spacing.
  • Base: anchor plates or other engineered fixings suited to the deck.
  • Finish: primer and hand-applied paint can match the surrounding villa.
  • Size: custom length and height measured at the actual pool edge.

Made to measure and quoted for your site

For Fabric Pool Safety Fence, share a plan of the pool, paths and access points with Tent Shed. Any pool barrier must have its height, openings, gates, fixings and applicable local requirements evaluated for the specific property; the photograph does not certify safety performance. See Tent Shed contact details to share measurements and discuss a tailored fence quotation.

Additional information

Application

Fabric-look pool perimeter screen

Pictured appearance

a low, light-coloured fabric-look enclosure with fine upright divisions

Infill option

Fine HDPE net fabric option; choose shade and mesh

Steel frame

GI or MS steel pipe / final design by quotation

Column options

2 / 3 / 4 in pipe; 4 in GI × 3 mm example

Rail or purlin options

1 / 2 / 3 in pipe; 2 in GI × 2 mm example

Mounting

Site-specified ground or slab fixing

Size

Made to measure for site; any practical length and height

Frame finish

Primer and paint; colour confirmed at quotation

Additional specification

Gates, fabric grade and barrier details to be confirmed

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.